Test Equipment > Force Gauges > Force Gauges w Torque Sensors | ||||||
|
||||||
OverviewThe DFS3 Series offers the best price performance of any digital force gauge available today. This compact, easy-to-use force gauge is designed for basic and complex applications. Ideal for handheld or test stand applications, the DFS3 may be equipped with integral loadcells or smart remote sensors for load measurement or torque measurement.
|
The DFS3 Series offers the best price performance of any digital force gauge available today. This compact, easy-to-use force gauge is designed for basic and complex applications. Ideal for handheld or test stand applications, the DFS3 may be equipped with integral loadcells or smart remote sensors for load measurement or torque measurement.
Measurement accuracy is better than 0.1% full scale in integral load cell models. A large, easy-to-read, high resolution, full color LCD display supports a variety of standard gauge functions including normal and peak readings, high/low limits, setpoints, pass/fail results, statistical results, load averaging, % and sharp break detection, loadcell actuation and direction. Loads are displayed in ozf, gf, lbf, kgf and N units. The display can be inverted and displayed results may be “hidden” from the operator. The DFS3 also offers password protection for gauge set ups. Outputs
The DFS3 Series comes standard with a USB-C connection. The USB interface allows communications with a PC. Calibrate and Verify Status
The DFS3 Series incorporates flash memory. You have immediate access to battery conditions, including estimated battery life remaining. You can also view loadcell status, including the number of overloads that have been applied to the gauge Time Method
The Time method allows you to establish your load averaging based on a load threshold and time duration. The load threshold determines the start of the averaging, while the time duration defines the length of the test period. The gauge will begin taking readings when the threshold is reached and will continue to take and average readings until the time duration has expired. Battery Life
The extraordinarily long battery life of the DFS3 reduces the need for continuous recharging. The dimming functionality of the DFS3 provides a battery life of 30 hours when the dimming is off while turning the dimming on will provide a full 40 hours of battery life. Unique User Interface
Easy to use, single layer user interface. No deep menu structure! Operate and set-up the DFS3 to perform your tasks. Fast and intuitive! The high resolution display features brightness adjustments and can be inverted when required. The display can even be “hidden” at the press of a button. A load bar graph indicating load direction, measured load, and safe load helps prevent overloads: the load bar changes from green to red to indicate proximity to load cell capacity. The integral loadcells feature mechanical overload protection at 150% Full Scale. Dependable Measurements
The DFS3 Series features an integral loadcell sensor that delivers repeatable, accurate results. The innovative load bargraph shows dynamic load, direction of load and warns you of pending overload conditions. Smart technology in the gauge even keeps track of overload history to aide in maintenance and troubleshooting.
Supplied Ready-To-Go
Regardless of the configuration, your DFE3 is supplied ready-to-go. The gauge and accessories are supplied in a durable carrying case that is designed for all components
including adapters and a USB charger. The units are powered by an internal, rechargeable Lithium-Ion battery. The compliment of adapters is comprehensive
and includes a hook, compression tip, pointed tip, chisel tip, and a notch tip: everything you need to get started. Up to two external sensors can be connected in the DFS3 force gauges. Together with the internal sensor., the full set-up provides a 3-in-1 device. The force gauge shows the results from one sensor at a time, so that there is no doubt as to which sensor the results come from. It is easy to connect the two external sensors - they both have an ADC inline box, which ensures a stable digital signal and enables the force gauge itself to identify them with a single click. The digital communication offers an improved accuracy and keeps the calibration information stored within the external device, meaning it can be used by other DFS3 gauges without affecting readings. This makes it plug-and-play. Unique User Interface The AFM and AQM sensors are automatically recognized by the DFS3 force gauge. The integrated electronics associated with the sensors contain all the calibration parameters necessary to guarantee the best measurement precision and metrological monitoring. In addition, potential overloads, dates, and values are also stored in memory and displayed. Always up to speed With the DFS3 you are always sure to have the latest firmware on your device. Our cloud-based software AMETEK Device Agent helps you identify the latest firmware and get it updated in only 60 sec. Versatility and Flexibility All the DFS3s have an internal Loadcell and TWO external transducer inputs. A Test Station could be configured and set up with 3 transducers.
Functions and Features
Automate with ForceTest (Free with your Chatillon DFE3)
Accessories
AFM & AQM
Versatility and Simplification The external sensors: AFM external load cell, and the AQM external torque transducer, can be used together with our force gauge DFS3 to offer ultimate flexibility when performing different types of tests in various applications without having to constantly change settings. All settings can be preconfigured so that the sensors are ready for use, and this especially increases the effciency when doing repeated testing day-after-day.
AFM & AQM with the DFS3
The DFS3 manages and interfaces with one sensor at a time. With FIVE Test Setups available, you can pre-configure your tests with the required transducer. This simplifies and improves the quality and reliability of your measurements. Fast and intuitive!
Included Accessories List
Full Accessories List
Handle Assembly, DFE3/DFS3. SPK-DF3-HANDLE
5/8 Eye End Kit with Grip Pin for Gauges. SPK-TCM-001
Kit, DF Metric Couplers #10-32_M6; SPK-TCM-033
Battery Charger, Universal, with Cable . SPK-DF3-UNIV
SPK-TCM-001 The redesigned grip and fixture connection kit offers more flexibility with a wide variety of fixtures.
Model with AQM Remote Torque Loadcell | DFS3-002-AQM-0003 | DFS3-010-AQM-0012 | DFS3-050-AQM-0050 | DFS3-100-AQM-0100 | DFS3-200-AQM-0200 |
---|---|---|---|---|---|
Capacity x Resolution | 3 x 0.0001 Lbf.in (Gauge 2 x 0.0001 lbf) |
12 x 0.0001 Lbf.in (Gauge 10 x 0.001 lbf) |
50 x 0.001 Lbf.in (Gauge 50 x 0.001 lbf) |
100 x 0.001 Lbf.in (Gauge 100 x 0.01 lbf) |
200 x 0.01 Lbf.in (Gauge 200 x 0.01 lbf) |
35 x 0.001 N.cm (Gauge 50 x 0.001 N) |
125 x 0.001 N.cm (Gauge 100 x 0.001 N) |
500 x 0.01 N.cm (Gauge 500 x 0.01 N) |
1000 x 0.01 N.cm (Gauge 1000 x 0.01 N) |
2000 x 0.1 N.cm (Gauge 2500 x 0.1 N) |
|
1 x 0.00001 kgf (Gauge 1 x 0.00001 kgf) |
5 x 0.0001 kgf (Gauge 5 x 0.0001 kgf) |
25 x 0.001 kgf (Gauge 25 x 0.001 kgf) |
50 x 0.001 kgf (Gauge 50 x 0.001 kgf) |
100 x 0.001 kgf (Gauge 100 x 0.001 kgf) |
|
3500 x 0.1 g.cm (Gauge 5000 x 0.1 gf) |
12500 x 0.1 g.cm (Gauge 10000 x 0.1 gf) |
50000 x 1 g.cm (Gauge 50000 x 1 gf) |
- | - | |
50 x 0.001 Oz.in (Gauge 32 x 0.001 ozf) |
192 x 0.01 Oz.inbr>(Gauge 160 x 0.01 ozf) | 800 x 0.01 Oz.in (Gauge 800 x 0.01 ozf) |
1600 x 0.1 Oz.in (Gauge 1600 x 0.1 ozf) |
- | |
Ports | USB-C | ||||
Accuracy | ±0.1% of Full Scale | ||||
Maximum Overload | 150% of Rated Capacity | ||||
Resolution | Up to 100,000 resolution points (according the Unit & Capacity) |
||||
Peak Capture Rate | 30 kHz | ||||
Data Sampling | 30 kHz | ||||
Display Update Rate | 10 Hz | ||||
Data Save | Up to 1000 Results (internal 32Go SD Card) | ||||
Loadcell Thread End | #10-32 | 5/16-18 UNC | |||
Power | Battery (Lithium Ion) or via the USB-C port | ||||
Battery Life | With Dimming On: 40 Hours With Dimming Off: 30 Hours |
||||
Operating Temperature | 40 to 110°F (5 to 45°C) | ||||
Included AQM Torque Transducers Model | AQM-003 | AQM-012 | AQM-050 | AQM-100 | AQM-200 |
Capacity x Resolution | 3 x 0.0001 Lbf.in | 12 x 0.0001 Lbf.in | 50 x 0.001 Lbf.in | 100 x 0.001 Lbf.in | 200 x 0.01 Lbf.in |
35 x 0.001 N.cm | 125 x 0.001 N.cm | 500 x 0.01 N.cm | 1000 x 0.01 N.cm | 2000 x 0.1 N.cm | |
3.5 x 0.0001 kg.cm | 12.5 x 0.0001 kg.cm | 50 x 0.001 kg.cm | 100 x 0.001 kg.cm | 200 x 0.01 kg.cm | |
3500 x 0.1 g.cm | 12500 x 0.1 g.cm | 50000 x 1 g.cm | 100000 x 1 g.cm | 200000 x 10 g.cm | |
0.35 x 0.00001 N.m | 1.25 x 0.00001 N.m | 5 x 0.0001 N.m | 10 x 0.0001 N.m | 20 x 0.001 N.m | |
50 x 0.001 Oz.in | 192 x 0.01 Oz.in | 800 x 0.01 Oz.in | 1600 x 0.1 Oz.in | 3200 x 0.1 Oz.in | |
Torsion | 3° | 3° | 3° | 3° | 3° |
Accuracy: | ±0.3% of Full Scale | ||||
Tare Capacity: | 10% of Rated Capacity | ||||
Maximum Overload: | 150% of Rated Capacity | ||||
Resolution: | Up to 100,000 points of resolution (adjustable depending on Capacity & Units) | ||||
Peak: | 1 kHz | ||||
Sampling: | 4 kHz | ||||
Display: | 10 Hz | ||||
Socket Adapter: | 3/8" (9.5mm) Square Female | ||||
Mandrel Max Opening: | 0.06 to 0.40" (1.6 to 10mm) | 0.08 to 1.20" (2 to 30mm) | |||
Operating Temperature: | 40°F to 110°F (5°C to 45°C) | ||||
Instrument Weight: | 1.1 lbs (0.5 kg) | ||||
Shipping Weight: | 4 lbs (2 kg) | ||||
Warranty: | 2 Years | ||||
Included Accessories: | SPK-DTG-037 - 1/4"(6.35mm ) square to Hex Socket Bit & Jacobs tightening key | SPK-DTG-039 - 1/2"(12.70mm ) square to Hex Socket Bit & Jacobs tightening key |
When combined with the DFS3, these rugged and accurate sensors turn your force gauge into a torque measurement device: no need to purchase another gauge. As is the case with the dedicated loadcells, the gauge may be handheld or used in diverse remote configurations with the straight cable of app. 9ft (2.8M) .
This configuration also offers the flexibility of having both a force and a torque measurement in a single gauge. This is the unit to select for maximum flexibility: one unit and interchangeable sensors can do it all. The gauge will operate the same as if it were an integral loadcell and all functions will operate normally.
The Chatillon® AQM series Torque Transducers are designed to operate in both clockwise and counterclockwise directions using strain gauge technology and an accuracy better than 0.3% of full scale is now possible for all detachable AQM Torque Transducers. All AQM Torque Transducers are calibrated in both clockwise and counterclockwise directions tabulated on the NIST calibration certificate.
Note: Ideally when measuring Torque, the Torque Transducer should be
placed so that the torque loads always passes through its center while
minimizing lateral forces.
Important: The requirements to accomplish this are for the Torque to be
applied centrally while keeping the best possible rigid retaining surface.
Calibration Certificate for AQM Torque Transducers The calibration of the AQM Torque Transducer is carried out with the greatest care by our metrology experts. All the AQMs are delivered with a calibration certificate and a statement of Clockwise and Counterclockwise Torque measurements.
$3,720.20 |
|